Network Settings

IP Address Settings

Setting the IP address for VN-V25U

There are two methods to set the IP address for VN-V25U as follows.

(A)Assigning an IP address to VN-V25U from the DHCP server

(B)Assigning a static IP address to VN-V25U

(A) Assigning an IP address from the DHCP server

●VN-V25U is set to ADHCP EnableB (the DHCP client feature is on) by default. To assign an IP address from the DHCP server, connect VN-V25U to LAN with DHCP server, and turn on VN-V25U. Allowing the DHCP server to assign the same IP address to VN-V25U every time eases access to VN-V25U.

●For details on IP addresses assigned to VN-V25U, consult your network administrator.

You can look up the IP address of VN-V25U using the search tool in the supplied CD-ROM.

For details, please refer to AReadmeB file in the CD-ROM.

Caution:

●Set the DHCP server such that the same IP address is always assigned to the MAC address of VN-V25U by the DHCP server. Connection may fail if the above setting is not performed.

(B) Assigning a static IP address

System configuration required for setting IP address

The default setting for VN-V25U is ADHCP EnableB (DHCP client feature is turned on). Upon starting up in LAN without DHCP server, VN-V25U starts running with the following IP address after time out of DHCP.

IP address

: 192.168.0.2

Subnet mask

: 255.255.255.0

Default gateway

: Nil

Note:

●To set a static IP address for VN-V25U, connect VN-V25U, the switching hub and the computer for setting using a straight LAN cable of Category 5 and above.

Set up the computer for setting the IP address.

●Minimum computer specifications for setting

OS

: Windows XP (Professional or

 

Home Edition) (SP2)

Web browser : Internet Explorer

Version 6.0

Caution:

●When setting the IP address for VN-V25U, do so by using a network that is made up only of VN-V25U, the computer for setting and the switching hub.

●Using a hub connected to other network devices or networks via a LAN cable for setting can cause problems.

23