Network Settings

IP Address Settings (contiuned)

Changing the IP address using the Internet Explorer (contiuned)

6 The top page of VN-V686U appears

Click on [Network], followed by [Basic] on the next submenu.

7 The [Basic] page with the IP address settings appears

A Set the [IP Setting] item to [DHCP Disable].

BEnter the values you wish to specify in the [IP Address], [Subnet Mask] and [Default Gateway] fields.

CClick [OK].

A confirmation screen appears. Press the [OK] button. VN-V686U restarts using the new IP address. It takes about one minute for the camera to reboot.

Memo:

●Access from this computer may fail when the IP address of VN-V686U is changed. To enable access to VN-V686U from the same computer, alter the IP address at the computer accordingly.

When the display or configuration of the opened screen appears strange, check the computer settings using the following procedures.

AClick [Start]-[Control Panel]-[Display] and open the [Display Properties] window

BClick the [Settings] tab in the [Display Properties] window and click the [Advanced] button

CCheck that [DPI setting] in the [General] tab has become [Normal size(96DPI)]

DOtherwise, change the setting to [Normal size(96DPI)] and reboot Windows

30