1
2
With the label side up
• To insert an 8-cm disc, place it in the inner recess. 3 Press 0 on the player to close the disc tray.
4 Press 3 on the unit or 3 (SELECT) on the remote control unit.
The player starts playback from the beginning.
• Depending on the disc, playback starts when you close the disc tray.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back.
For DVD VIDEO
1 Press 5/∞/2/3 to select a desired item.
2 Press ENTER or 3 (SELECT).
The player starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item. The player starts playback of the selected item.
NOTES
• Do not insert an unplayable disc. (See page 2.)
• When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the player.
To check the playback status
You can see the current selection number (the title/chapter number for DVD VIDEO or track number for SVCD/Video CD/ Audio CD), time information (the track or chapter time while stopped, or elapsed track or chapter time during playback) and the transport status (stop, playback, pause, etc.) on the TV screen.
Press ON SCREEN. Example: for DVD VIDEO
Press 0 on the player to open the disc tray.
Place a disc in the disc tray.
Starting playback

0 7 3 8

DISPLAY/DIMMER

Numeric buttons

5/∞/2/3

SET UPENTER

3(SELECT)ON SCREEN

8

7

5 Press ENTER.

playback

The third page is shown, in which the pull-down menu of the

[DIGITAL AUDIO OUTPUT] is already open.

 

Basic

DVD PLAYER SET UP

 

 

DIGITAL AUDIO OUTPUT

DOLBY DIGITAL/PCM

ANALOG DOWN MIX

PCM ONLY

DOLBY PROLOGIC

 

 

DOLBY DIGITAL/PCM

D RANGE CONTROL

STREAM/PCM

 

OUTPUT LEVEL

 

 

 

SELECT

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM

 

 

TO EXIT, PRESS SETUP.

DIGITAL AUDIO OUTPUT options

6 Press 5/∞ to select a desired digital output signal type.

Set this item correctly when you connect the player to an external surround decoder or D/A converter. (If you do not connect the player to such a device, you do not have to set this item.)

•When connecting to other digital device, select [PCM ONLY].

•When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].

•When connecting to a DTS decoder, select [STREAM/ PCM].

7 Press ENTER.

The TV screen returns to the opening display.

To bring up the DVD PLAYER SET UP display later

Press SET UP for a few seconds until the DVD PLAYER SET UP display appears.

8

Transfer rate

Current chapter

 

Current transport

 

 

 

number

 

 

 

status

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8.5Mbps

 

TITLE 33

 

CHAP 33

 

TOTAL 1:25:58

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current title

 

number

 

 

 

 

 

 

 

 

 

 

 

Disc elapsed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

time