English 89
MP3/WMA source
Cannot play an MP3/WMA.
•The media is scratched or dirty.
The sound skips when an MP3/WMA is being played.
•The media is scratched or dirty.
•The recording condition is bad.
The MP3/WMA track time isn’t displayed correctly.
•---
Can’t display the ID3 tag information correctly.
•Record is not made in conformity with the ID3 tag
version 1.x.
The following messages are displayed when certain problems are occurring in your system. Take
the recommended actions.
Hot Error The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C
(140°F), stopping all operation.
]Cool down the unit by opening the windows or turning on the air conditioner. As the
temperature falls below 60°C (140°F), the disc will start playing again.
Hold Error The protective circuit in the unit activates when the temperature inside the automatic disc
changer exceeds 60°C (140°F), stopping all operation.
]Cool down the unit by opening the windows or turning on the air conditioner. As the
temperature falls below 60°C (140°F), the disc will start playing again.
Mecha Error The disc player is malfunctioning.
]Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
Disc Error The unplayable discs is inserted.
Read Error The disc is upside-down.
]Load the disc with the labeled side up.
The disc is quite dirty.
]Clean the disc, referring to the section on <Disc cleaning> (see page 6).
Region code Error The DVD software encoded for other region code.
Parental level Error The parental level is set to high levels.
Error 07 — 67 The unit is malfunctioning for some reason.
]Press the reset button on the unit. If the "Error ##" code does not disappear, consult your
nearest service center.
•Clean the media, referring to the CD cleaning of the
section on <About discs> (see page 6).
•Clean the media, referring to the CD cleaning of the
section on <About discs> (see page 6).
•Record the media again or use another media.
•There are times when it isn’t displayed correctly according
to the MP3/WMA recording conditions.
•Record in conformity with the ID3 tag version 1.x.
Also, the display may be incorrect if an MP3/WMA file
uses the ID3 tag v1.x standard and if this standard has
been expanded after production of the machine software.
DDX6017(En)r2.2 04.12.20 9:17 PM ページ89