Zone Control
You can set the front and rear audio source.
Displaying the Zone Control screen
Zone Control screen
3 
4 
6 
2 
1 | 7 |
|
| 5 |
|
|
| 5 |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sound Effects Menu
1Returns to the Control screen of the previous source.
2Calls the Setup Menu. (page 47)
3Calls the Sound Effects Menu.
4Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off.
When turned On, 
and 
are shown.
5Sets the front and rear audio source separately. (This button appears when the Zone function is On.)
•When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.
However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source.
6Switches the front and rear audio sources.
(This button appears when the Zone function is On.)
Use "Reverse" to change over the front and rear audio sources.
7Adjusts the volume of the rear channel.
(This button appears when the Zone function is On.)
•There are following limitations when zone function is set to "On".
-There is no output from the subwoofer.
-<Audio Set Up> (page 48) and <Equalizer> (page 72) are not available.
74 English