Preparing to Play Tracks
Preparation • Turn the unit ON.
Press the ON/STANDBY (POWER /
)key.POWER
Loading/unloading discs
Hereafter the illustration of the common parts 9 on the front panel is of
REMOTE CONTROL UNIT
: Keys and controls used in the operations described on this page.
1Load/unload a disc.
1Open the tray.0 |
Label side |
Disc tray 
DISC SKIP |
ÖDo not touch the played side of disc.
ÖLoading two discs together will cause malfunctioning.
ÖPlace the disc properly along the groove on the tray. (If the disc is not placed horizontally, malfunction will result.)
ÖA single CD (8 cm disc) can also be played.
ÖOrdinary CD single (8 cm) disc adapters sold in audio stores cannot be used with this unit.
ÖWhen loading/unloading a disc while the tray rotates, a malfunction might occur. Load/unload the disc when the tray does not rotate.
2Close the tray.
0 |
|
| DISC 1 | DISC 2 |
|
| DISC 3 |
|
|
| DISC 4 |
|
|
| DISC 5 | ||||||||||||||||||||
All DISC indicators " 
" light regardless of how many discs are present.
CD-204/203/DPF-R4010/R3010
DISC |
| SINGLE | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
| ||
NO. | TRACK NO. | TOTAL | 6 | 7 | 8 | 9 | 10 |
1 2 3 4 5 1 0 1 0: 0 0
All DISC indicators " 
" light regardless of how many discs are present.
ALL TEXT SEARCH
For most
Search in progress or reading information
| After loading all the discs, operate in stop mode. | Blinks. |
ALL TEXT
SEARCH
RC-
ÖThe information read into the CD player is cleared when the tray is opened. Therefore, perform this operation again if the tray was opened.
DISC READING
Ç
D1 : CD TEXT
When the disc is
ÖRepeat the above procedure so that the complete disc information is read into the CD player.
ÖIn the case of a
