Kenwood DVR-5070

DVR-5070 (EN)

Operations

Let's put out some sound

Preparation

÷set the POWER ON/OFF switch to the ON ( )

position.

POWER switch

INPUT

SELECTOR

keys

VOLUME CONTROL knob

POWER

key

VOLUME

keys

MUTE

key

INPUT key

PHONES jack

Basic use method

Selecting the desired input

Muting the sound temporarily

Listening through headphone

REMOTE

MAIN UNIT

REMOTE

MAIN UNIT

To decrease To increase To decrease

To increase

Remote control unit only

÷Press again to resume the original volume.

÷The sound muting is also cancelled when the volume is con-

trolled.

÷Press MUTE key.

Insert the headphone plug into the PHONES jack.

÷The sounds from all speakers are cut off.

÷When one of the keys on the left is pressed while STANDBY

mode, the power will be switched on automatically and the input

will be selected.

÷The power will be switched on and the respective operation will

be performed also when the EJECT key, the PLAY/PAUSE key

or the BAND key on the main unit is pressed during STANDBY

mode.

÷When a disc is set in the disc tray and the DVD CD key is pressed,

disc playback will start automatically.

In case of operation with the remote control unit, first

select the input or device to be operated with the INPUT

SELECTOR keys etc., and then perform the desired opera-

tion.

The present mode of the remote control unit may not

coincide with the equipment to be operated.

This unit offers various surround modes, but it switches

automatically to stereo mode when headphones are connected.

To open the door, pull the lower part on the right side of the

main unit.

DVD CD

FRONT

CABLE

RADIO VCR SAT

BAND

VOLUME

MUTE

1Tuner (frequency display)

2VCR (*VCR →ANALOG→VCR)

3SAT/CABLE (*SAT/CABLE→ANALOG→SAT/CABLE)

4FRONT (*FRONT→ANALOG→FRONT)

5DVD/CD

6TV

Switching is done as follows when the INPUT key of the

main unit is pressed.

Normally "80" is displayed when the volume settings set to the

maximum value.

The input mode can be switched with VCR, SAT/CA-

BLE and FRONT. Refer to “Changing the INPUT

MODE”i

Note

*The indication changes according to the INPUT

MODE setting. i

Volume adjustment