Kenwood DVR-505, DVR-7000

Preparations

DVR-505/DVR-7000 (EN)

Connecting to a TV

Connecting to a Satellite Tuner

COMPONENT Video cord (except for U.K)

*COMPOSITE Video cord (accessory)

S-Video cord

OPTICAL or COAXIAL cable

Audio cord

S-video cord

COMPOSITE

video cord

Depending on the input switching, the output from the MONITOR OUT terminal will be one of

the following signals. Please note that a different signal type will not be put out.

S-VIDEO terminal : S-video signal connected to the (S-VIDEO) VCR IN, the (S-VIDEO) SAT IN, or

the AV AUX S terminal.

VIDEO terminal : Composite video signal connected to the (VIDEO) VCR IN, the (VIDEO) SAT

IN, or the AV AUX VIDEO terminal.

COMPONENT connection corresponds only to some areas.

When the TV has a COMPONENT terminal, the DVD image will be played

back with higher picture quality in case of COMPONENT connection.

Connect the S-video or the COMPOSITE video cable also in this case.

Note

Remove protective cap

before connecting.

Connect the OPTICAL or the COAXIAL cable, depending on the digital output of the satellite tuner.

*For U.K. only

If your TV set has a SCART terminal,

connect the accessory SCART plug to the

SCART terminal of the TV and connect

the COMPOSITE video cord.

Satellite tuner

System Connections