Kenwood DVT-6200

Preparations

DVT-6200 (EN/K,E,X)

Connecting to a TV

Connecting to a Satellite Tuner

COMPONENT Video cord

*COMPOSITE Video cord

(accessory)

S-Video cord

Audio cord

COMPOSITE

video cord

**COMPONENT connection corresponds only to some areas.

When the TV has a COMPONENT terminal, the DVD image will be played

back with higher picture quality in case of COMPONENT connection.

Connect the S-video or the COMPOSITE video cable also in this case.

Select the scanning method of the Component Video output using the

PROGRESSIVE (ACTIVE EQ.) key on the front panel.

Note

*For Europe only

If your TV set has a SCART terminal,

connect the accessory SCART plug to

the SCART terminal of the TV and

connect the COMPOSITE video cord.

Satellite tuner

System Connections

Note

**0nly for

some areas.

Depressed and keep pressing the key. Each time

the key is being held down, the setting changes

as follows.

1ON

2OFF

ON: When progressive scanning is unavailable with certain discs, the scanning

method is switched automatically to interlaced scanning. When the scanning

method is changed, the scanning status will be displayed for a few seconds.

OFF: Scanning method is fixed at interlaced scanning.

Example for some areas

The S-Video output terminal of this unit is only for output of the built-in

DVD player. The output of equipment connected to VCR, CABLE/SAT is put

out as a composite signal.

03.7.8, 11:05 AMPage 13