Kenwood DVT-6200 - page 26

DVT-6200 (EN/K,E,X)
Set Up functions
26
Preparations
3Press Cursor up/down (5/∞) keys on the remote
to select PASSWORD, then press the Cursor
right (3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the PREFERENCE, then press the
ENTER key to access the sub features
6Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
7Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Change Password
5Enter old password, new password and enter
new password again to confirm, then press the
ENTER key. (The password set at the time of ship-
ping from the factory is "0000".)
4press the ENTER key to select CHANGE.
Please refer to pages 18 and 19 for setup.
3Press Cursor up/down (5/∞) keys on the remote
to select DEFAULTS, then press the Cursor right
(3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the PREFERENCE, then press the
ENTER key to access the sub features
4press the ENTER key to select RESET.
5Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Put back to the Defalt
Setting
03.7.8, 11:06 AMPage 26