DVR-6300 (EN/K,P,E,X)
Set Up functions
17
Preparations
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
5.1 Speaker Setup
Others
Disc Audio Code Set
C A
Progressive Scan
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
R R
Front L
Volume 0 dB
Size Small
Distance 1 ft
Test
Return
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio Off
On
Note
Note

Changing the Password (4-digit code)

1Select LOCK on the setup menu then press the
Cursor right (3) key.
2Enter the old 4-digit code, then press ENTER
key.
3Select "Change" using the Cursor up/down (5/
∞) keys. then press ENTER.
4Enter the new 4-digit code, then press ENTER
key. Input it again to verify.
5Press SETUP key to exit the menu.

If you forget Password

If you forget your security code you can clear using the
following steps:
1Press SETUP key to display the Setup menu.
2Input the 6-digit number "210499" and the pass-
word is cleared.
3Enter a new code as described above.
Country Code LOCK (Continued)
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the list
in the reference chapter.
Ratings are country-dependent.
1Select "Country Code" (() on the setup
menu, then press the Cursor right (3).
2Follow step 2 of "Rating" on page 16.
3Select the first character using the Cursor up/
down (5/∞) keys.
4Shift the cursor using the Cursor right (3) key.
and select the second character using the Cur-
sor up/down (5/∞) keys.
5Press ENTER to confirm your country code se-
lection.
5.1 Speaker Setup
Select speaker settings, including volume balance
and delay time, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output.

Refer to “Speaker setting”.™

Progressive Scan (for U.S.A. and Canada)
Progressive Scan Video provides the highest quality pic-
tures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the DVD
Player to a standard (analog) television, set Progressive
Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Once the setting for progressive scan output is en-
tered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1Press 7 (stop) key to stop any disc that is playing.
2Press 7 (stop) key again for more than 5 seconds.
The video output will be restored to the standard
setting, and a picture will once again be visible on
a conventional analog TV or monitor.
*5476/15-19/EN 04.7.27, 2:05 PM17