PLAYER

 

 

 

 

Knowledgesections

 

 

In case of difficulty

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Symptom

 

 

 

Remedy

 

 

 

 

 

The player cannot be turned on

 

The BATT.ON/OFF switch is set to [OFF]: Slide it to [ON].

 

or operated by pressing a button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The built-in battery is exhausted: Connect the AC adaptor to recharge the battery.

 

 

 

[Recharging of the built-in battery]

$

 

 

 

 

 

 

 

 

 

 

 

The hold mode is set: Slide the HOLD switch to release the hold mode.

 

 

 

[Names and functions of parts] 9

 

 

 

 

 

 

 

 

The player is connected to the PC: The operations performed on the player are defeated while it

 

 

 

is connected to a PC.

 

 

 

 

 

 

 

 

 

The built-in battery runs out

 

The battery is degraded: Replace it with new one.

quickly after recharging.

 

(For the replacement of the built-in battery, contact your dealer.)

 

 

 

 

Playback is impossible.

 

There is no audio data stored in the player: Transfer audio data in the player using the

 

 

 

application software Kenwood Media Application or Windows Media Player.

 

 

 

[Kenwood Media Application] INSTRUCTION MANUAL

 

 

 

[Transfer of audio data from the PC to the player] &

 

 

 

 

Audio is not heard.

 

The headphones are connected improperly: Check the connection of headphones to the player.

 

 

 

[Playback of audio data]

^

 

 

 

 

 

 

 

 

 

 

 

 

The volume is set to the minimum: Adjust the volume.

 

 

 

[Adjusting the volume]

(

 

 

 

 

 

 

 

 

The recharging icon is not

 

The BATT.ON/OFF switch is set to [OFF]: Slide it to [ON].

displayed.

 

[Recharging of the built-in battery]

$

 

 

 

 

 

 

 

 

 

 

 

The AC adaptor is connected improperly: Check the connection of the AC power cord and power

 

 

 

cord to the player.

 

 

 

 

 

 

 

 

[Recharging of the built-in battery]

$

 

 

 

 

 

 

 

 

 

 

 

The ambient temperature is outside the operating temperature range: The battery should be

 

 

 

recharged within the operating temperature range.

 

 

 

[Operating Precautions]

4

 

 

 

 

 

 

 

 

The recharging icon disappears

 

The player stops recharging automatically in order to prevent the temperature from rising. This

while the AC adaptor is con-

 

is not malfunction: Wait a while until recharging restarts.

nected.

 

 

 

 

 

 

 

 

 

 

 

The PC does not recognize

 

The PC and the player are connected improperly: Check the connection between them.

the player.

 

[Recharging of the built-in battery]

$

 

 

 

 

 

 

The power of the player is turned off: Turn on the player.

 

 

 

[Turning the player on/off] ^

 

 

 

 

 

 

 

 

 

 

 

 

 

7Resetting the player

The player may malfunction (impossibility of operation, erroneous display, etc.) after a connection cord is unplugged during use or due to an external factor. If this happens, reset the player as described below.

1

Disconnect the AC adaptor from the player.

 

 

 

 

2

Set the BATT. ON/OFF switch to [OFF], wait for about 5 seconds, and set the switch again to [ON].

When the BATT. ON/OFF switch is set to [OFF], the following setups are reset to the defaults.

TIMER SETTING

DATE/TIME

POINT :

Even when the player is reset, the audio data in the built-in HDD is not deleted.

EN

 

42