Menu Operation
Function of
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary input source.
1Select Auxiliary input source Press the [SRC] button. Select the “AUX” display.
2Enter Menu mode
Press the [B.BOOST] button for at least 1 second.
“MENU” is displayed.
3Select Auxiliary input display setting mode Press the top or bottom side of the Control knob.
Select the “NAME SET” display.
4Enter Auxiliary input display setting mode Press the center of the Control knob for at least 1 second.
The presently selected Auxiliary input display is displayed.
5Select the Auxiliary input display
Press the right or left side of the Control knob. Each time you push the knob, the display alternates as listed below.
•“AUX”
•“DVD”
•“PORTABLE”
•“GAME”
•“VIDEO”
•“TV”
6Exit Auxiliary input display setting mode Press the [B.BOOST] button.
⁄
•When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.
•The Auxiliary input display can be set only when the
Function of
Receive mode Setting
Setting the receiver mode.
1Select the Receive mode
Press the top or bottom side of the Control knob.
Select the “HDR MODE” display.
2Enter Receive mode
Press the center of the Control knob for at least 1 second.
3Set the Receive mode
Press the top or bottom side of the Control knob.
Receive mode | Display | Operation |
Auto mode | “AUTO” | Automatically tunes to analog |
|
| broadcast when there is no digital |
|
| broadcast. |
Digital | “DIGITAL” | Digital broadcasts only. |
Analog | “ANALOG” | Analog broadcasts only. |
4Exit Receive mode
Press the [B.BOOST] button.
Function of
Demonstration mode Setting
Sets the demonstration mode.
1Select the Demonstration mode
Press the top or bottom side of the Control knob.
Select the “DEMO” display.
2Set the Demonstration mode
Press the center of the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below.
Display | Setting |
“DEMO ON” | The Demonstration mode function is ON. |
“DEMO OFF” | Exit Demonstration mode (Normal mode). |
12