Kenwood KDC-3026R RDS features

Selecting the Program Type display language.
1Enter PTY mode
Refer to <PTY (Program Type)> (page 11).
2Enter Changing Language mode
Press the [CLK] button.
3Select the language
Press the [1] —[3] button.
Button Language
[1] English
[2] French
[3] German
4Exit Changing Language mode
Press the [CLK] button.
Changing Language for PTY Function
Putting the Program Type in the Preset button memory and
calling it up quickly.
Presetting the Program Type
1Select the Program Type to preset
Refer to <PTY (Program Type)> (page 11).
2Preset the Program Type
Press the [1] —[6] button for at least 2 seconds.
Calling up the preset Program Type
1Enter PTY mode
Refer to <PTY (Program Type)> (page 11).
2Call up the Program Type
Press the [1] —[6] button.
Program Type preset
RDS features
— 12—
English
Setting the volume during Traffic Information.
1Receive the station.
2Set the volume you want.
3Preset the volume
Press the [VOL ADJ] button for at least 2 seconds.
The volume level display blinks 1 time.
Presetting Volume for Traffic Information
Switching to traffic information automatically when a traffic
bulletin starts even when you aren't listening to the radio.
Press the [TI] button.
Each time the button is pressed the Traffic Information function
turns ON or OFF.
When it's ON, "TI" indicator is ON.
When a traffic information station isn't being received the "TI"
indicator blinks.
When a traffic bulletin starts, "TRAFFIC" is displayed it and it
switches to traffic information.
During reception of a AM station when the Traffic Information
function is turned ON, it switches to a FM station.
Receiving other traffic information stations
Press the [4] or [¢] button.
Traffic information station switching can be done when listening to
the radio.
Traffic Information
KDC-3026R_U.S 2003.09.30 04:08 PM Page 12