1Press the M.RDM button to switch magazine random play on and off.

The RDM indicator lights up when magazine random play is turned on. (KDC-316S/37MR/316V)

"MRDM ON" is displayed when magazine random play is turned on. (KDC-416S)

The disc and track numbers will change over and over in the display as the next track is being selected.

When the disc/track has been selected, play will begin. The selected disc/track number blinks in the display as it is being played.

2To change the track being heard, press the ¢ button. Another disc/track will be selected and played.

NOTE

•Magazine random play is canceled when you eject the disc.

•The time needed for random selection depends on the number of discs loaded in the disc magazine.

5Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

6Press the FM or AM button to display the desired character. Characters that can be displayed are as follows.

Alphabet (capital letters) : A~Z

Numerals/characters : 0~9 @ " ‘ ` % & * + - = , . / \ < > [ ]

7Continue steps 5 and 6 until all the characters are chosen for the name.

NOTE

You can enter up to 8 characters for each name.

8Assigning Names Press the MENU button.

The disc name is stored and the Presetting Disc Names mode ends.

If you make no entry in a 10-second period, the name will be stored with the characters input so far.

NOTE

Function of the KDC-416S

Presetting Disc Names (DNPS)(Function of disc changers)

Store the names of discs to be displayed when played.

1Play the disc whose name you want to preset.

NOTE

This function is not available for disc changers that do not feature the Disc Name Preset function.

2Enter the menu mode

Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered.

3Press the FM or AM button to select the display "NAME SET" .

4Press either the 4 or ¢ button for at least two seconds to enter the disc name preset mode.

The cursor blinks in the position where character input can be made.

•The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details.

•Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too.

•If you want to change the name of a disc, repeat steps 1 to 4 to display the name, and then repeat steps 5 and 6 to enter the changes.

— 19 —