Disc control features (See page 7)

English

Playing CDs

Playing CDs:

Press the Á(EJECT) button to slide open the faceplate, showing the CD (insertion) slot. Holding the CD with the labeled side facing up, insert it in the slot. The faceplate will show the control panel, and the CD will start playing.

The ¢ indicator will light when a CD has been inserted.

Playing CDs Already Inserted:

Press the SRC button repeatedly until the CD mode is obtained. "CD" is displayed when the CD mode has been selected.

The CD will start playing.

Pausing and Restarting CD Play:

Press the 38 button to make the disc pause.

Press the same button again to start play again.

Eject:

Hold down the Á(EJECT) button for one second or more to stop CD play. The faceplate will slide to eject the CD.

Press the Á(EJECT) button to show the control panel.

2CAUTION

•Do not attempt to insert a CD into the slot if another one is already there.

•The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm (3-inch) CD, it will get stuck inside and can cause the unit to malfunction.

NOTE

•The sound will be temporarily muted whilst the faceplate is moving.

•The only buttons that will work during the eject state are the Á(EJECT), SRC, TI and ATT buttons, as well as the volume control button.

•When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it.

■When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit.

Set the O-N switch to "N". "N"-operation will be set.

■When a unit that is not equipped with an O-N switch, or the changer switching unit "KCA-S200" is connected, "O"- operation will be set.

"N"-operation:

•The disc title and track title of the CD text can be displayed.

•The disc name will be displayed when the name has been registered to any connected unit with the Presetting Disc Names function, or when the playing unit contains a disc to which the disc title has been recorded.

"O"-operation:

•CD text cannot be displayed.

•Regardless of the control unit, the characters that can be

registered with the Presetting Disc Names function are "A~Z 0~9 /, +, –, ∗, =, <, >, [ , ]".

•The disc name will be displayed when the name has been registered to the playing unit with the Presetting Disc Names function.

NOTE

The CD text, Presetting Disc Names, and Disc Name Preset Play functions may not be operational depending on the unit.

— 20 —