Other features (See page 8)

English

Audio Control Setting

Adjust various parameters of sound quality.

1Press the AUD button to enter the control mode.

2Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will change as follows:

Pressing the FM button advances the display, and pressing the AM button reverses it.

▼

 

Bass

High-pass filter (rear)

▼▲

Treble

High-pass filter (front)

▼▲

Balance

N-F Level (only when being switched)

▼▲

Fader

(KDC-PS9060R only)

NOTE Source tone memory

Each source (CD, FM, AM, and disc changer) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.).

3Press the 4/¢ button.

Look at the table to adjust the mode being displayed.

4Press the AUD button to end the control mode.

NOTE Setting the high-pass filter (KDC-PS9060R only)

You can separately set the high-pass filter for front and rear output, including preouts. The high-pass filter works except during non- fading preout when switching to non-fading.

The factory default settings for front output and rear output are "through".

Table of Audio Control Setting

Adjustment

Operation of Audio control button

mode

 

 

(Display)

4 button

¢ button

Bass

Bass decreased.

Bass increased.

(“BAS”)

 

 

 

 

 

Treble

Treble decreased.

Treble increased.

(“TRE”)

 

 

 

 

 

Balance

Left channel

Right channel

(“BAL”)

emphasized.

emphasized.

 

 

 

Fader

Rear channel

Front channel

(“FAD”)

increased.

increased.

 

 

 

Non-Fading

The front and rear

The non-fading sound is

Preout Level

sound is emphasized.

emphasized.

(“NF”)

 

 

 

 

 

High-pass

You can select the frequency to be cut, as

filter for front

follows:

 

output

THROU (through) ↔ 40Hz ↔ 60Hz ↔ 80Hz ↔

(“HPF F”)

100Hz ↔ 120Hz ↔ 150Hz ↔ 180Hz ↔ 220Hz

 

 

High-pass

You can select the frequency to be cut, as

filter for rear

follows:

 

output

THROU (through) ↔ 40Hz ↔ 60Hz ↔ 80Hz ↔

(“HPF R”)

100Hz ↔ 120Hz ↔ 150Hz ↔ 180Hz ↔ 220Hz

 

 

 

KDC-PS9060R only

— 28 —