36 | English
CD/MP3/WMA/External disc control features

Function of MP3/WMA

Folder Select

Quickly selecting the folder you want to listen to.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "FSEL" is
displayed above the [5] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
2 Enter Folder Select mode
Press the [5] ("FSEL") button.
"FOLDER SELECT" is displayed.
During Select mode the folder information is
displayed as shown below.
Folder name display
Displays the current folder name.
Folder number display
Displays the number in the folder
belonging to the currently selected folder.
3 Select the folder level
Press the [FM] or [AM] button.
With the [FM] button you move 1 level down and
with the [AM] button 1 level up.
Selecting a folder in the same level
Press the [4] or [¢] button.
With the [4] button you move to the previous
folder, and with the [¢] button to the next
folder.
Returning to the top level
Press the [4] ("HOME") button.

Scrolling the folder name display

Press the [SCRL] button.
4 Decide the folder to play
Press the [2] ("OK") button.
The Folder Select mode releases, and the MP3/
WMA in the folder being displayed is played.
The methods for moving to other folders in the folder
select mode are different from those in the folder
search mode.
See 'Notes on playing MP3/WMA' (page 8) for details.

Disc Naming (DNPS)

Attaching a title to a CD.
1 Play the disc you want to attach a name to
A title can’t be attached to MD or MP3/WMA media.
Refer to the 'Text Display Switching' (page 16/18) and
select the "DNPS" display. No name can be attached
to the source if "DNPS" cannot be selected for it.
2 Enter name set mode
Press the [NAME.S] button for at least 2
seconds.
"NAME SET" is displayed.
3 Move the cursor to the enter character
position
Press the [4] or [¢] button.
4 Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character
type switches as shown below.
Character type Button
Alphabet (Upper case/ Lower case) [2] ("A • a")
Numbers and symbols [3] ("1")
Special characters (Accent characters) [4] ("CHAR")
5 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a
number button.
Example: If "DANCE" is entered.
Character Button Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME.S] button.

Canceling the Folder Select mode

Press the [3] ("EXIT") button.