Channel Scan
Every receivable Channel is checked for 10 seconds.
1Enter Channel Scan mode
Press the [
] button for at least 1 second.
2Release it when the channel you want to listen
to is received
Press the [
] button.
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1Enter Direct Access Tuning mode Press the [DIRECT] button.
2Enter the channel
Press the number buttons.
3Tune in to the entered channel Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [
] button.
⁄
•If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled.
•If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, “ACQUIRING SIGNAL”/ “NO SIGNAL” appears.
English 29