General operation

Before Using

Exit of the Demonstration Mode

Turn off the demonstration mode when you use it for the first time after installation.

1Press the [VOL] knob to quit the demonstration mode when the messages “CANCEL DEMO” and “PRESS”, “VOLUME KNOB” are displayed (approx. 15 seconds).

2Turn the [VOL] knob to select “YES” and press the [VOL] knob.

The demonstration can be set or cancel using <Demonstration Mode Setting> (page 20).

Common Operation

Power and source select

Turns the power ON by pressing the [SRC] button.

Pressing [SRC] button each time switches between sources.

Tuner (“TUNER” or “HD RADIO”) USB or iPod (“USB” or “iPod”) CD (“CD”) Auxiliary input (“AUX”) Standby (“STANDBY”)

Keeping pressing the [SRC] button at least 1 second turns the power OFF.

When connection of the iPod is recognized, the source display changes from “USB” to “iPod”.

The source “CD” and “iPod” can be selected when each source is ready to play.

When an optional accessory is connected, the source name for each device appears.

Volume

Turning the [VOL] knob adjusts the sound volume.

Function Setting Operation

The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures.

1Select the source Press the [SRC] button.

Function items vary from source to source. For a list of the function items. Refer to <Function Item List> (Page 34).

2Enter Function Setting mode KDC-BT645U: Press the [VOL] knob for at least

1 second.

KDC-HD545U: Press the [VOL] knob.

”FUNCTION” is displayed.

3Select your desired function item

Turn the [VOL] knob and press it when the desired item is displayed.

Repeat the operation until your desired function item is selected.

Press the [] button to return to the previous item.

Example:

 





AUDIO CONTROL

 

 

 

 

SUBWOOFER SET

 

 

 

 

 

 

 

 [VOL]

[VOL]



 

 

DETAILED SET



 

 

 

 

LPF SUBWOOFER

DISP SELECT

SETTINGS

In this manual, the above selection is indicated as

Select “AUDIO CONTROL” > “DETAILED SET” > “LPF SUBWOOFER”.

4Make a setting

Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.

5Exit Function Setting mode

Press the [] button for at least 1 second.

English 5