⁄

•You can set the Security Code with a 4 digit number of your choice.

•The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.

1Enter Standby

Press the [SRC] button. Select the "STANDBY" display.

2Enter Menu mode

Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is also displayed.

3Enter Security Code mode

Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed.

4Select the digits to enter

Push the Control knob towards [4] or [¢].

5Select the Security Code numbers

Push the Control knob towards [FM] or [AM].

6Repeat steps 4 and 5, and complete the Security Code.

7Confirm the Security Code

Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed.

8Do the step 4 through 7 operation, and reenter the Security Code.

"APPROVED" is displayed.

The Security Code function activates.

⁄

•If you enter the wrong Code in steps 4 through 6, repeat from step 4.

Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed

1Turn the power ON.

2Do the step 4 through 7 step operation, and reenter the Security Code.

"APPROVED" is displayed. Now, you can use the unit.

⁄

•When the Security Code function is activated, "CODE SET" changes to "CODE CLR".

•To deactivate the Security Code function, see the next section <Deactivating Security Code>.

Function of KDC-MP2035/KDC-MP235

In Standby mode

Deactivating Security Code

To deactivate the Security Code function.

1Select Security Code mode

Push the Control knob towards [FM] or [AM]. Select the "CODE CLR" display.

2Enter Security Code mode

Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed.

3Select the digits to enter

Push the Control knob towards [4] or [¢].

4Select the Security Code numbers

Push the Control knob towards [FM] or [AM].

5Repeat steps 3 and 4, and complete the Security Code.

6Press the Control knob for at least 3 seconds. "CLEAR" is displayed.

The Security Code function deactivates.

⁄

•If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code.

In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.

Display

Setting

"BEEP ON"

Beep is heard.

"BEEP OFF"

Beep canceled.

English 19