Menu system
Function of the
In Standby mode
Switching preout
Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)
Display | Setting |
"SWPRE R" | Rear preout. |
"SWPRE SW" | Subwoofer preout. |
Function of the
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP ON" | The |
"AMP OFF" | The |
Function of the
When the Dual Zone System is ON
Dual Zone System Setting
Setting the Front channel and Rear channel sound in the Dual Zone System.
Display | Setting |
"ZONE2 R" | Sub source (Auxiliary input source) is to be rear |
| channel. |
"ZONE2 F" | Sub source (Auxiliary input source) is to be front |
| channel. |
Function of the
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the main unit.
Display | Setting |
"BMS FLT" | Bass boost level is flat. |
"BMS +6" | Bass boost level is low (+6dB). |
"BMS +12" | Bass boost level is mid (+12dB). |
"BMS +18" | Bass boost level is high (+18dB). |
•Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.
•For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the unit, "BMS +18" will not work correctly even if it is selected.
Function of the
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display | Setting |
"BMSF NML" | Boost with the normal central frequency. |
"BMSF LOW" | Drop the normal central frequency 20%. |
30 English