Menu system
In Standby mode
CD Read Setting
When there is a problem with playing a CD with special format, this setting plays the CD by force.
Display | Setting |
"CD READ1" | Play CD and Audio file. |
"CD READ2" | Play CD by force. |
⁄
•Some music CDs may not play even in the "CD READ2" mode.
In Standby mode
Firmware Version Display
Displaying the firmware version with the unit.
1Select the firmware version display mode Push the Control knob towards up or down. Select the "F/W VER" display.
2Display the firmware version
Push the Control knob towards right or left.
In Standby mode
Demonstration Mode Setting
Sets the demonstration mode.
1Select the Demonstration mode
Push the Control knob towards up or down. Select the "DEMO" display.
2Set the Demonstration mode
Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below.
Display | Setting |
"DEMO ON" | The Demonstration mode function is ON. |
"DEMO OFF" | Exit Demonstration mode (Normal mode). |
26 English