46 | English
Menu system
Function of the KDC-X889/KDC-X789

When LX AMP unit connecting

AMP Control
You can control the LX AMP connected to the
unit.
1 Select AMP Control mode
Push the Control knob to [FM] or [AM].
Select the "AMS Control" display.
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Contol knob to [FM] or [AM].
• For the details of the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the Control knob to [4] or [¢].
5 Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
Function of the KDC-X889/KDC-MP828/KDC-X789
Traffic Information
Switching to traffic information automatically
when a traffic bulletin starts even when you aren’t
listening to the radio.
Display Setting
"TI : OFF" The Traffic Information function is OFF.
"TI : ON" The Traffic Information function is ON.
When a traffic bulletin starts, "Traffic INFO" is
displayed it and it switches to traffic information.
• During reception of an AM station when the Traffic
Information function is turned ON, it switches to an
FM station.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it’s automatically
the remembered volume.

Receiving other traffic information stations

(In tuner source)

Push the Control knob to [4] or [¢].
• Traffic information station switching can be done
when listening to the radio.

In FM reception

CRSC (Clean Reception System Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display Setting
"CRSC : ON" The CRSC is ON.
"CRSC : OFF" The CRSC is OFF.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.

In HD Radio mode

Receive mode Setting
Sets the receive mode.
1 Select the Receive mode
Push the Control knob to [FM] or [AM].
Select the "Receive Mode" display.
2 Enter Receive mode
Press the Control knob for at least 1 second.
3 Set the Receive mode
Push the Control knob to [FM] or [AM].
Each time the knob is pushed, the Receive mode
switches as shown below.
Receive mode Display Operation
Auto mode "Auto" Analog broadcasts and digital
broadcasts will be switched
automatically.
When both are being transmitted,
the digital broadcast will have
priority.
Digital "Digital" Digital broadcasts only.
Analog "Analog" Analog broadcasts only.