remote.
The name of the station is stored in memory, and the Station Name Preset mode ends.
Also, if you make no input for 10 seconds, the name will be stored up to the point that you have entered, and the mode ends.
NOTE
•You can assign names to up to 32 FM stations and 16 AM stations.
•All the station names will be erased if you press the RESET button.
•If you want to change the name of a station, first display the name of the station (following steps 1 and 2 above), then change the letter(s) that you want by following steps 3 and 4.
Station Name Preset Play (SNPP)
(Function of Remote)
You can search for the station for any station if its name has been preset using Station Name Preset.
1Press the DNPP button on the remote.
"SNPP" will be displayed once the station name preset play mode is entered.
The names of the stations stored in the band currently listened to are displayed in the following order for five seconds each:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the ¢ button, the station display switches in the forward direction.
Each time you press the 4 button, the station display switches in the reverse direction.
Stations whose names have not been stored will be displayed as frequencies.
The program service name will appear for RDS stations.
NOTE Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the reverse direction.
2Once the name is displayed for the station you want to listen to
Press the OK button.
Reception starts of the displayed station, and the station name preset play mode ends.
Canceling mode during input:
Press the DNPP button.
The station name preset play mode is canceled.
— 19 —