Audio Adjustments
Listening Position Selection
The sound environment can be compensated in accordance with the selected position. According to the listening position, select the position from the following settings.
Compensation seat |
| Display |
Not compensating. |
| “ALL” |
| ||
| ||
Front seat |
| “Front” |
( |
| : Factory setting) |
1Select the source
Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.
2Enter Audio Control mode Press the [VOL] knob.
3Enter Preset position setting mode
Turn the [VOL] knob and press it when the desired item is displayed.
Select “Position” > “Preset Position”.
4Select the seat you want to compensate Press the [4] or [¢] button.
5Exit Audio Control mode
Press the [MENU] button for at least 1 second, and then press it again briefly.
Function of
Listening Position Fine Adjustments
Making fine adjustment of the value specified at Preset position selection per speaker.
1Select the source
Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.
2Enter Audio Control mode Press the [VOL] knob.
3Enter Manual position setting mode Turn the [VOL] knob and press it when the desired item is displayed.
Select “Position” > “DTA”.
4Select the speaker you want to set
Turn the [VOL] knob and press it when the desired value is displayed.
Item | Setting overview |
“FRONT” / “L” | Front Left speaker |
“FRONT” / “R” | Front Right speaker |
“REAR” / “L” | Rear Left speaker |
“REAR / “R” | Rear Right speaker |
“SUBWOOFER” / “L” | Subwoofer Left |
“SUBWOOFER” / “R” | Subwoofer Right |
“INITIAL” | Initialize the setting values. |
5Set the value
Press the [4] or [¢] button.
Adjust between 0 and 5.58 feet.
Press the [VOL] knob for at least 1 second if you want to execute the “INITIAL”.
6Exit Audio Control mode
Press the [MENU] button for at least 1 second, and then press it again briefly.
Dual Zone System
Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.
Display | Overview |
|
| |
“2Zone Rear Volume”*1 | Adjust the volume of Rear channel. | |||
|
| “0” — “35” |
|
|
“Detailed Setup” |
|
|
| |
| “2Zone” | Sets the Dual Zone System. | ||
|
| “OFF”/ “ON” |
|
|
| “2Zone Select”*1 | Specifies the destination of sub source sound | ||
|
| when the Dual Zone function is turned on. | ||
|
| “Rear”/ “Front” |
|
|
*1 The Dual Zone System is set to “ON”. |
|
| ||
|
| ( |
| : Factory setting) |
1Select the source
Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.
2Enter Audio Control mode Press the [VOL] knob.
3Turn the [VOL] knob and press it when the desired item is displayed.
Select “Detailed Setup”.
4Select the item you want to set
Turn the [VOL] knob and press it when the
40