Function of
Bluetooth Setup
Registering Bluetooth device
To make your Bluetooth device
When registering from Bluetooth devices
1Turn on the control unit.
2Start registering a unit by operating the Bluetooth device
By operating the Bluetooth device, register the
3Enter a PIN code
Input the PIN code registered as mentioned in <Registering PIN Code> (Page 32).
Check that registration is complete on the Bluetooth device.
4By operating the Bluetooth device, start hands- free connection.
When registering from this unit
1Select Bluetooth device registration mode Select “MENU” > “Device Regist”.
For how to select Function Control item, refer to <Function Control> (page 6).
2Enter Bluetooth device registration mode Press the Control knob for at least 1 second. Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3Select the Bluetooth device
Turn the Control knob and push the center when the desired Bluetooth device is displayed.
4Input the PIN code
Press the [FNC] button.
⁄
•This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device.
•If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device.
•If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth device> (Page 32).
Registering Special Bluetooth device
Allow registration of a special device that cannot be registered normally (pairing).
1Select Special device registration mode Select “MENU” > “SPCL DVC Select”.
For how to select Function Control item, refer to <Function Control> (page 6).
2Enter Special device registration mode Press the Control knob for at least 1 second. A list is displayed.
3Select a device name
Turn the Control knob and push the center when the desired device name is displayed. If “Completed” is displayed, registration is completed.
4Go through the procedure of <Registering Bluetooth device> (Page 32) and complete the registration (pairing).
Cancelling Special device registration mode Press the [FNC] button for at least 1 second.
⁄
• If the device name is not in the list, select “Other Phones”.
Operation type |
| Operation |
Select the numbers. |
| Turn the Control knob or push it towards |
|
| up or down. |
Move to the next digit. |
| Push the Control knob towards right. |
Delete the last digit. |
| Push the Control knob towards left. |
5Transmit the PIN code
Press the Control knob for at least 1 second. If “Pairing Success” is displayed, registration is completed.
Registering PIN Code
By operating the Bluetooth device, specify the PIN code necessary for registering this unit.
1Select PIN code edit mode Select “MENU” > “PIN Code Edit”.
6Return to the device list Press the Control knob.
7Exit Bluetooth device registration mode
For how to select Function Control item, refer to <Function Control> (page 6).
2Enter PIN code edit mode
32