Installation
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Accessory!
Rubber Bush
FirewallAccessory90
Attachment screw
•When the space between the unit and Firewall is narrow
Unit | Firewall | |
Accessory9 | Accessory! | |
Attachment screw | ||
Rubber Bush | ||
|
•When the space between the unit and Firewall is wide
Unit | Firewall | |
Accessory0 | Accessory! | |
Attachment screw | ||
Rubber Bush | ||
|
•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Japanese cars
1Refer to the section <Removing the hard rubber frame> (page 73) and then remove the hard rubber frame.
2Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws.
T N
•During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit.
•Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main unit so that it does not fall off.
1Refer to the section <Removing the hard rubber frame> (page 73) and then remove the hard rubber frame.
2Drop open the faceplate by pressing the Release button.
3Tighten the screw (ø2 × 5 mm) (Accessory5) and bracket (Accessory 6) in the hole shown on the diagram.
Accessory6
Accessory5
4Tighten the screw (ø2 × 5 mm) (Accessory5) and bracket (Accessory7) in the hole shown on the diagram.
N T
T/N
T : Toyota cars
Accessory7
Accessory5
For Nissan car | For Toyota car | N : Nissan cars |
8 mm
MAX.8mm MAX.
34
ø5mmø5mm
72