If you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
Press the DNPP button on the remote control.
"DNPP" will appear in the display, and the disc name preset play
mode is entered.
The preset names/disc titles of the disc in the disc changer to
which you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not been
disc name preset will display "NO NAME".
•This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
•Discs in the disc changer that have never been played before
will appear as "NO ACCES" when the disc names are displayed.
When you cannot identify a disc because of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name.
Also note that "NO DISC" will be displayed when a disc has not
been loaded.

Rapid display (forward / reverse):

Press the DISC+or DISC–button.
Pressing the DISC+button will rapidly display the preset
names/disc titles in order.
Pressing the DISC–button will rapidly display the preset
names/disc titles in reverse order.

When the name appears for the disc you want to play

Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.

To cancel DNPP mode:

Press the DNPP button.
The disc name preset play (DNPP) mode will be cancelled.
2
NOTE
1
Disc Name Preset Play (DNPP)

Function of remote control with DNPP button

— 25—
Play the tracks on all the discs in the disc changer in random
order.
Press the M.RDM button to switch the magazine random play
function on and off.
"MRDM ON" is displayed when magazine random play is turned
on.
The display of the disc and track numbers change continuously
as the next track is being selected.
When the disc/track has been selected, play starts.
The selected disc/track number blinks in the display as it is
being played.
This function is not available with the following models:
KDC-C200/C300/C400/C301/C401
To change the track being heard, press the ¢button.
Another disc/track is selected and played.
•The magazine random play function is cancelled when you stop
playing a disc.
•The time needed for random selection depends on the number
of discs loaded in the disc magazine.
NOTE
2
NOTE
1
Magazine Random Play
(
Function of disc changers)