English 29

Destination & Way Points

The destination or way points used in route calculation can be changed using this function.

Addition of way points

The following procedure can be used to add new way points to the current route for calculation.
1Select .
2Set the way point using your preferred method.
When a new destination is set by (Destination), it will replace
the current destination and route calculation will be carried out once
again.
3When the required way points have been setup, indicate
the order in which they are to be visited.
Choose the location to be added, and then select .
4Select .
• When a new destination is set by (Destination), it will replace the current destination and route calculation
will be carried out once again.
• Step 3 is required when setting the 2nd way point and more after.
• Repeat step 1 and 3 until all desired way points have been set.
3(Route Options) 3(Dest. & Way Pt.)
Before Steps
KNA-DV3100(K)_ENG r7 03.7.7 5:34 PM Page 29