7
KRF-V7020/V6020/V5020 (En/T)
Preparation
Names and functions of parts
Remote control unit (RC-R0710)
REMOTE CONTROL UNIT
RC-R0710
POWER
123
0456
+107
LISTEN
MODE S.DIRECT
DISC SKIP
A/B +100AUTOBAND
TITLE
SUB TITLE
MD/TAPE TUNER CD
PTY TA/NEWS DISPLAY
PHONO
DVD CONT VIDEO 1 VIDEO 2/
MONITOR
DVD/
6 CH INPUT
OSD
SET UPSOUND
MENU
ENTER
MUTE
MULTI CONTROL
VOL.UP
267
1 TUNING ¡ 4 P.CALL ¢
89
VOL.DOWN
1
2
3
4
5
6
7
#
8
9
0
!
@
1Numeric keys
If CD or MD is selected as the input source,
these keys function as numeric keys. If
tuner is selected as the input source, these
keys are used to call up station presets.
2Component operation keys
Use these keys to operate other compo-
nents with system control connections to
the receiver.
2 key
If tape is selected as the input source, this
key functions as the play key for side B of
the cassette (the side facing away from
the front of the deck).
BAND (6) key &
If tuner is selected as the input source, this
key functions as the band selector key.
If CD is selected as the input source, this
key functions as the play/pause key.
If MD is selected as the input source, this
key functions as the play key.
DISC SKIP, A/B, +100 key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip
key.
If TAPE is selected as the input source,
this (A and B) of a double cassette deck.
7DVD CONT keys
Used to operate DVD player.
While holding this key depressed, press
any of the keys masked in gray in the
above illustration to operate the corre-
sponding function of a DVD player from
KENWOOD.
Keys 3, 4, 5, 9 and ! are given the
following functions during the DVD player
control operation.
3 :TITLE
4 :ENTER
5 :SUB TITLE
9 :MENU
! :OSD
For details, refer to the instruction manual
of your DVD player.
8POWER key #
Use to switch the power ON/STANDBY
when the POWER is turned ON.
9SOURCE DIRECT key ^
0VOLUME CONTROL key
!SETUP key #
Use to select the surround sound settings.
@RDS operation keys
Use to receive RDS broadcasts.
#Input selector keys %
Use to select the receiver's input source.
AUTO (7)key &
If tuner is selected as the input source, this
key functions as the AUTO key.
If CD or MD is selected as the input source,
this key functions as the stop key.
TUNING (1 ¡) keys &
If tuner is selected as the input source,
these keys function as tuning keys.
If CD or MD is selected as the input source,
these keys function as search keys.
P.CALL (4 ¢) keys (
If tuner is selected as the input source,
these keys function as P.CALL keys.
If CD or MD is selected as the input source,
these keys function as skip keys.
3 LISTEN MODE, TITLE key £
Use to select the listening mode.
4MUTE, ENTER key ^
Use to temporarily mute the sound.
5SOUND key ¢
Use to adjust the sound quality and ambi-
ence effects.
6MULTI CONTROL key
Used to make a variety of settings.