HANDHELD CONTROL HEAD INTERFACE KIT

 

KRK-11

 

INSTRUCTION MANUAL

© B62-2102-00 (M)

Features
・This is an optional accessory for the KCH-16.・You can connect an external speaker to the interface box.
Supplied Accessories
Note:

◆The following instructions are for use by your Kenwood dealer, an authorized Kenwood service facility, or the factory.

◆Refer to the Service manual for detailed information regarding the installation of the KCH-16.

Item
Part Number
Quantity
Interface Box

−

1

Main body panel assembly

−

1

Ground cableE30-3085-XX

1

Retaining bandJ61-0307-XX

1

Retaining bracketJ21-4354-XX

2

ConnectorE59-0426-XX

1

Screw setN99-2069-XX

1

Screw set

N99-2070-XX

1

Instruction manualB62-2102-XX

1

Interface boxScrew set : N99-2069-XX

 

(For Interface box)
Main body panel assemblyScrew set N99-2070-XX

 

(For Main body panel assembly)

Ground cable

Connector

Installation

The following tools and parts are required for installing the handheld control head interface kit.

・ Phillips No. 2 screw driver・ KCT-22 Remote Control Cable
hanger
KCH-16
External speaker (Option)
Transceiver
KCT-18 (Option)

Ignition Sense Cable

 

KCT-22 (Option)
Interface box

Remote Control

Cable

Note:

◆When connecting the KCH-16 to the Interface box, do not connect the MIC to the programming connector of the Interface box.

◆The programming connector of the interface box is dedicated to programming.

◆The control connector of the interface box is dedicated to the KCH-16; do not use this connector for other equipment.

◆The optional jack is supplied for future expansion. It cannot be used at this time.

◆Do not remove the covers or caps of connectors that are not currently being used.

◆After connecting the KCH-16 and turning on the power, do not remove the KCH-16.

Retaining band

Retaining bracket