Troubleshooting Guide

The messages shown below display your systems condition.

EJECT:

No disc magazine has been loaded in

 

the changer. The disc magazine is not

 

completely loaded.

 

➪ Load the disc magazine properly.

 

No CD in the unit.

 

➪ Insert the CD.

No Disc:

No disc has been loaded in the disc

 

magazine.

 

➪ Load a disc into the disc magazine.

TOC Error:

No disc has been loaded in the disc

 

magazine.

 

➪ Load a disc into the disc magazine.

 

The CD is quite dirty. The CD is upside-

 

down. The CD is scratched a lot.

 

➪ Clean the CD and load it correctly.

E-05:

The CD is upside-down.

 

➪ Load the CD correctly.

E-15:

Media was played that doesn’t have data

 

recorded that the unit can play.

 

➪ Use media that has data recorded that

 

the unit can play.

No Panel:

The faceplate of the slave unit being

 

connected to this unit has been removed.

 

➪ Replace it.

E-77: The unit is malfunctioning for some reason.

➪Press the reset button on the unit. If the “E-77” code does not disappear, consult your nearest service center.

Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

➪Check the disc magazine. And then press the reset button on the unit. If the “Mecha Error” code does not disappear, consult your nearest service center.

Hold Error:

The protective circuit in the unit activates

 

when the temperature inside the

 

automatic disc changer exceeds 60°C

 

(140°F), stopping all operation.

 

➪ Cool down the unit by opening

 

the windows or turning on the air

 

conditioner. As the temperature falls

 

below 60°C (140°F), the disc will start

 

playing again.

NO NAME:

Attempted to display DNPS during the CD

 

play having no disc names preset.

Load:

Discs are being exchanged in the Disc

 

changer.

Reading:

The unit is reading the data on the disc.

0/3(IN) (Blink): The CD player section is not operating properly.

➪Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.

Unsupported:

A MP3/WMA is played with a format that

 

this unit can’t support.

 

➪ ----

Protected:

A copy-protected file is played.

 

➪ ----

34 English