4
Before Use
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
In compliance with Federal Regulations, following are
reproductions of labels on, or inside the product relating to
laser product safety.
Location : Bottom Panel
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment may cause harmful
interference to radio communications, if it is not installed
and used in accordance with the instructions. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-
003.
To prevent injury and/or fire, take the following
precautions:
•Ensure that the unit is securely installed. Otherwise it
may fly out of place during collisions and other jolts.
•When extending the ignition, battery or ground wires,
make sure to use automotive-grade wires or other wires
with an area of 0.75mm2(AWG18) or more to prevent
cable deterioration and damage to the cable coating.
•To prevent short circuits, never put or leave any metallic
objects (e.g., coins or metal tools) inside the unit.
•If the unit starts to emit smoke or strange smells, turn
off the power immediately and consult your Kenwood
dealer.
•Do not touch the liquid crystal fluid if the LCD is
damaged or broken due to shock. The liquid crystal fluid
may be dangerous to your health or even fatal.
If the liquid crystal fluid from the LCD contacts your
body or clothing, wash it off with soap immediately.
To prevent damage to the machine, take the
following precautions:
•Make sure to ground the unit to a negative 12V DC
power supply.
•Do not open the top or bottom covers of the unit.
•Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid places
with too much dust or the possibility of water splashing.
•Do not subject the faceplate to excessive shock, as it is
a piece of precision equipment.
•When replacing a fuse, only use a new one with the
prescribed rating. Using a fuse with the wrong rating
may cause your unit to malfunction.
•To prevent short circuits when replacing a fuse, first
disconnect the wiring harness.
•Do not use any screws except for the ones provided.
The use of improper screws might result in damage to
the main unit.
•You cannot view video pictures whilst the vehicle is
moving. To enjoy TV/video pictures, find a safe place to
park and engage the parking brake.
•If you experience problems during installation, consult
your Kenwood dealer.
•If the unit does not seem to be working right, try
pressing the reset button first. If that does not solve the
problem, consult your Kenwood dealer.
Screen brightness during low temperatures
When the temperature of the unit falls such as during
winter, the liquid crystal panel's screen will become
darker than usual. Normal brightness will return after
using the monitor for a whilst.
Loading and Replacing the Batteries for the
Remote
Do not set the remote on hot places such as above the
dashboard.
1. Use two "AAA" batteries.
Slide the cover while pressing downwards to remove
it as illustrated.
2. Insert the batteries with the ªand · poles aligned
properly following the illustration inside the
case.
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is accidentally
swallowed.
•The provided batteries are intended for use in operation
checking, and their service life may be short.
•When the remote controllable distance becomes short,
replace both of the batteries with new ones.
NOTE
2WARNING
2CAUTION
NOTE
2CAUTION
2WARNING
NOTE
NOTE
2CAUTION
ATT TI
SOURCE
EJECT
OPEN
Reset button
KENWOOD CORPORATION
2967-3, ISHIKAWA-CHO,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
KVT_911DVD_Eng_01 02.1.25 2:24 PM Page 4