66
Troubleshooting Guide
SOLUTIONPOSSIBLE CAUSEPROBLEM
External disc control mode
The computer chip in the unit is not
functioning normally.
Press the reset button on the unit (see p. -
4).
The disc control mode cannot
be selected.
No wire has been connected to the disc
changer input terminal on the unit.
Connect the wire to the disc changer input
terminal on the unit.
The specified disc does not
play, but another one plays
instead.
The specified CD is quite dirty. Clean the CD.
The CD is upside-down. Load the CD with the labeled side up.
The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the
number for the specified disc.
The disc is severely scratched. Try another disc instead.
The sound skips. Something is touching the disc changer. Remove whatever is touching it.
The CD is scratched or dirty. If skipping happens at the same place
when the car is stopped, something with
the CD is wrong. Clean the CD.
The display shows that the
changer is being played, but no
sound can be heard.
The specified track will not
play.
Random play or magazine random play has
been selected.
Turn off random play or magazine random
play.
Track repeat, disc repeat, track
scan, disc scan, random play,
and magazine random play start
by themselves.
The setting is not cancelled. The settings for these functions remain on
until the setting to off or the disc ejected,
even if the power is turned off or the
source changed.
SOLUTION
POSSIBLE CAUSEPROBLEM
The sound/picture skips on a
DVD/VCD/CD.
The disc is scratched or dirty. Clean the disc, referring to the section on
"Cleaning discs" (see p. 5).
A track will not play. Random play has been selected. Turn off random play.
A VCD cannot be played using
menus.
The subtitle is not displayed.
The voice (or subtitle) language
cannot be changed.
The viewing angle cannot be
changed.
Playback will not start even
after a title is selected.
The voice or subtitle language
selected in the initial setting is
not played.
The VCD disc being played is not compatible
with P.B.C.
The DVD disc being played does not contain
the recording of subtitles.
The DVD disc being played does not contain
the recording of more than one audio (or
subtitle) language.
The DVD disc being played does not contain
the recording of more than one angle.
You are attempting to switch the angle in a
DVD section where more than one angle is not
recorded.
A viewing restriction (RATING) has been set
for the disc.
The DVD disc being played does not contain
the recording of the selected voice or subtitle
language.
Menu playback is available only with VCD
discs recorded with P.B.C.
The subtitle cannot be displayed when the
DVD disc being played does not contain the
recording of subtitles.
The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more than
one voice (or subtitle) language.
The viewing angle cannot be changed when
the DVD disc being played does not contain
the recording of more than one angle.
More than one viewing angle may be
recorded only in limited sections in a disc.
Check the viewing restriction level
(RATING) setting.
Use a DVD disc containing the recording of
the selected voice or subtitle language.
The TEL mute function does
not work.
The TEL mute wire is not connected properly. Connect the wire correctly, referring to the
section on "Connection".
The TEL mute function turns
on even though the TEL mute
wire is not connected.
The TEL mute wire is touching a metal part of
the car.
Pull the TEL mute wire away from the metal
part of the car.
KVT_911DVD_Eng_01 02.1.25 2:25 PM Page 66