Before Use

< Touch Panel Adjustment >

TV Area Setting Screen

Setting the TV Area

(During the KTC-V500P is connected)

Select the area for TV broadcast viewing.

Selecting the Preset Bands:

Touch the [TV 1] or [TV 2] button.

Selecting the Reception Area:

Each time you touch the [ 2 ] or [ 3 ] button. Select the channel setting for your country as follows.

G1

China

PAL-D

G2

Burnei

PAL-B/G

 

Malaysia

 

 

Singapore

 

 

Thailand

 

G3

Hong Kong

PAL-I

G4

Indonesia

PAL-B/G

G5

Australia

 

•The reception area can be set for two separate preset bands TV1 and TV2.

Exit the TV Area Setting Screen

Touch the [Return] button.

Return to the Setup menu screen.

Touch Panel Adjustment Screen

Adjusting the Touch Position

The touch panel can be adjusted if the position touched and the operation performed do not match.

1Accurately touch the mark at the lower left.

2Accurately touch the mark at the upper right. When the mark at the upper right is touched, the adjustment is completed and the system setup menu screen reappears.

•If the [Cancel] button is touched without touching the button at the lower left, the adjustment is canceled and the screen goes back to the Setup Menu Screen.

•If the [Cancel] button is touched after touching the button at the lower left, the button at the lower left reappears.

•If the [Reset] button is touched, the settings are reset to the factory defaults and the setup menu screen reappears.

•Pulling out the Connection cable to the TV tuner, settings of the TV Area will be default. Press the Reset button and set the TV Area again if the Connection cable is reconnected.

12 English