Appendix

Notes on Disposal

Removing the Rechargeable Battery (Built-in Battery) Before Disposal: M1GD50

IMPORTANT:

Never attempt to open the Player besides when disposing of it.

For replacement of the built-in battery, contact your nearest Kenwood service agent.

1 Remove the rubber of back panel.

7Take out the built-in battery. Be careful

2 Remove the 1 screw from the panel

not to injure your nail or finger during

using a precision Phillips screwdriver

removal.

(+).

8 Attach a piece of insulating tape on

3 Remove the front panel (by releasing

the connector at the end of the cable

8 latches).

from the built-in battery, and put it in a

4 Remove the 4 screws from the circuit

plastic bag, etc.

board using a precision Phillips

 

screwdriver (+).

 

5Take out the circuit board.

 

6Disconnect the built-in battery from the connector. Be careful not to apply an excessive force on the connector.















•Remove the built-in battery after having confirmed that it is completely discharged.

•Once the built-in battery is disconnected, do not attempt to reconnect it to the connector on the circuit board.

•Bring the removed built-in battery to a rechargeable battery recycling business as early as possible.

32

English