4Press the VOLUME/MULTI CON- TROL keys to select “TUNER” or “AUX”, then press the SET/TUN- ING MODE key.
“TUNER”: Radio
“AUX” : AUX input source
5To record a radio station, press the VOLUME/MULTI CONTROL keys to select preset station to be recorded, then press the SET/ TUNING MODE key.
7Execution
6Press the ON/STANDBY 
key
(or 
POWER key on the remote
control) to put the unit in the STANDBY mode.
The STANDBY/TIMER indicator lights in green.
When the set ON time comes, the timer program is executed and recording starts.
To cancel program timer :
Perform steps 2 to 4 and select “TIMER OFF” of “Program timer” (page 47) until “PROG.” is not lit.
To check or change the timer setting :
Restart the procedure from step 1 again.
÷Be sure to adjust the time of the day (page 7) before using the timer functions.
÷The speakers’ output will decrease during timer recording.
÷Even when the program timer is canceled, previously made setting is stored in memory and remains until new timer information is set the next time.
÷When the STANDBY/TIMER indicator is blink- ing in green, the timer setting or clock set- ting is erroneous. Check and correct them as required (pages 7 & 49 to 50).