Let's have sound

CHANNEL SPACE setting (Except for the U.S.A., Canada, U.K., Europe, and Australia)

33

The space between radio channels has been set to the one that prevails in the area to which the system is shipped. However, if the current channel space setting does not match the setting in the area where the system is to be used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by referring to the following table.

 

Area

CHANNEL

 

SPACE freq.

 

 

 

 

 

 

 

1

U.S.A., Canada and South

FM

:

100 kHz

 

American countries

AM

:

10 kHz

2

Other countries

FM

:

50 kHz

 

 

AM :

9 kHz

 

 

 

 

 

1Press the ON/STANDBY (or POWER) ( )key to put the unit in the standby mode.

STANDBYSTANDBY

POWERON/STANDBY

(For U.S.A.)

2Press the 7 (stop) key to select the channel spacing setting.3Press the 7 (stop) key repeatedly to set the channel space. 1 “FM100/AM10” STEP 2 “FM 50 /AM 9” STEP

÷The display turns off 10 seconds after the setting is made if no further changes are made.

÷The “AM” display is variable depending on the model (country or area), and “MW” may be displayed in some areas.

÷When the channel spacing is changed, all stored tuner presets are cleared.

section Basic