54
Effective sound adjustment
Surround play (NV-701 only)
The DTS mode can be used only with CD, DVD or LD media carrying the DTS mark. DOLBY DIGITAL can
be used when playing DVD or LD software bearing the 
mark and when playing DOLBY DIGITAL
mark.Be sure to complete "Setting up for surround sound" in order to achieve the best possible surround sound. )
Application section
1Play the source.
2Select the desired sound mode.
(Remote control unit only)
LSTN M.
Note that the only listening mode settings that can be used for playback with the current input signal type and speaker settings are available.
SOURCE |
|
| DOLBY | DOLBY |
|
| DTS | DOLBY | PRO | DIGITAL | PCM |
MODE | DIGITAL | LOGIC | (2ch) | ||
|
|
|
|
| |
DTS | ÷ |
|
|
|
|
DOLBY |
| ÷ |
|
|
|
DIGITAL |
|
|
|
| |
DOLBY |
|
| ÷ | ÷ | ÷ |
PRO LOGIC |
|
| |||
DOLBY |
|
| ÷ | ÷ | ÷ |
3 STEREO |
|
| |||
| VIRTUAL | ÷ | ÷ | ÷ | ÷ | ÷ |
| SURROUND | |||||
STEREO | ÷ | ÷ | ÷ | ÷ | ÷ |
| THEATER | ÷ | ÷ | ÷ | ÷ | ÷ |
| ARENA | ÷ | ÷ | ÷ | ÷ | ÷ |
|
|
|
|
|
|
÷When listening to DTS or Dolby Digital sources, the DSP modes “VIRTUAL SURROUND”, ”STEREO”, “THE- ATER”, and “ARENA” can be selected to further en- hance the audio.
÷PCM is the standard
Press the CD key to start playback of a CD, or the VIDEO/6ch IN key repeatedly to select the appropriate video input.
Thesoundmodechangeseachtimeyoupressthe LSTN M. (Listen Mode) key as follows:
“Stereo” “Pro Logic” “3 Stereo” “Virtual” “Theater” 
“Arena”÷The listening mode settings are stored separately for each input. If the input mode is set to “D – Auto”, the receiver selects the optimal listening mode automatically based on the type of input signal and the speaker settings.
÷When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital.
÷If a Dolby Digital signal having more channels than the maximum number of playback channels available using the receiver’s current settings is input, the DOWNMIX indica- tor lights on the display and downmixing is performed to match the number of available channels.
Example:If a Dolby Digital 5.1 signal is being input and the unit is set to the STEREO mode or if the center speaker channel is turned off.
÷Noise will be produced if a DTS source is played and the Input Mode is set to “Analog” analog input. Should this occur, set the input mode to “D – Auto” or “D – Manual” for digital audio input.
Example using a Dolby Digital source signal
|
|
| The sound channels | |||
Selected input | present in the input source | |||||
source |
| signal are displayed. | ||||
| AUTO | DIGITAL | DOLBY DIGITAL |
|
|
|
|
|
|
| |||
|
|
|
| |||
Video1 | LS |
| RS |
| ||
|
|
| L | C R |
| |
|
|
| LFE |
| ||
|
|
|
|
|
|
|