System connection 7
Center speaker
Subwoofer
Front speaker
Surround speaker
Front speakers: Place to the front left and right of the listening position at equal distances from both the unit and the listening position. Front speakers are required for all surround modes.
Center speaker: Place front and center. This speaker stabilizes the sound image and helps recreate more natural sound motion.
Surround (rear) speakers: Place to the direct left and right, or slightly behind, the listening position at even heights approximately 1 meter (3.5 ft.) above the ears of the listeners. These speakers recreate rear sound motion and atmosphere, and are required for surround playback. Subwoofer: Reproduces deep bass and other low frequency sounds.
By performing the “Surround Options” setup operations, this unit makes automatic adjustments to account for the way the speakers have been set up in order to deliver the
best possible surround sound. | ) |
CAUTION
(For U.S.A.,Be sure to adhere to the following or proper ventilation will be blocked causing damage or fire hazard.
÷Do not place any objects impairing heat radiation onto the top of this unit.
Speaker and TV installationThemagnetin thespeakersmaycausecolorirregularity if set on the TV. If this occurs, place the speaker farther away from the TV set.
Malfunction of the microcomputerIf operation is not possible or an erroneous display appears even though all connections have been made properly, reset the microcomputer. Refer to “In case of
difficulty”.¨section Preparation
1.Be sure to insert all connection cords securely. If connections are not secure, the sound may not be
produced or noise may interfere.Notes 2.Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.
CAUTION
Be sure to adhere to the following or proper ventilation will be blocked causing damage or fire hazard.
•Do not place any objects impairing heat radiation onto the top of unit.
•Do not place a speaker or any other object next to the ventilation holes on the left side of the main unit. For proper ventilation, be sure to provide sufficient space on the left side of the main unit.
•Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below.
Top panel : 50 cm | Side panel : 10 cm | Back panel : 10 cm |