GROUP B–3

SCAN

Press to start or stop various Scan functions.

AUTO

Press to switch the Auto mode selection function ON or OFF. When it is active, “A” appears on the display.

SG SEL

Press to enter the Scan Group select mode. Select your desired memory group numbers using the [b]/ [a] key, or by turning or pressing the MULTI/ CH control, then press [SEL] to toggle the selection. The selected group numbers are highlighted. You can also press [ALL] to deselect all the group numbers. Press [OK] to save the setting or [CLR] to cancel the selection.

VISUAL

Press to activate the Visual Scan function {page 39, TS-2000 page 70}.

GROUP B–4

DUAL

Press to switch the sub-receiver ON or OFF.

CTRL

Press to move the Control band to another receiver. The frequency display of the Control band appears in a large font. If the same band is selected for the TX band and Control band, only “PTT” appears on the display.

LOCK

Press to lock all the keys and controls of the RC-2000. Press and hold to unlock the keys and controls of the RC-2000.

Q.M

Press to recall the Quick Memory channel. “Qnn” appears, indicating which Quick Memory channel is recalled (where “nn” = 00 ~ 09). Turn the MULTI/ CH control to scroll through the Quick Memory channels.

METER

Press to change the meter mode between SWR, ALC, and COMP. Press and hold to toggle the meter mode between PWR and SWR/ ALC/ COMP.

20