VFO Scan monitors all frequencies tunable on the band, using the current frequency step size.
1Select the desired band.
2Press [VFO] (1 s).•Scan starts at the frequency currently displayed.
•The 1 MHz decimal blinks while scanning is in progress.
•To reverse scan direction, press [UP] (upward scan) or [DWN] (downward scan).
3To quit VFO Scan, press [ESC].
Use Memory Scan to monitor all memory channels programmed with frequency data.
1Select the desired band.
2Press [MR] (1 s).•Scan starts with the channel last recalled.
•The 1 MHz decimal blinks while scanning is in progress.
•To reverse scan direction, press [UP] (upward scan) or [DWN] (downward scan).
3To quit Memory Scan, press [ESC].
Note:
◆On the current band at least 2 or more memory channels must contain data and must not be locked out.
◆The L0 to L9 and U0 to U9 memory channels are not scanned.
◆You can also start Memory Scan when in Channel Display mode. While Scan is being interrupted, the channel number blinks.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
35