PROGRAM SCAN
Program Scan is identical with VFO Scan except that you select the frequency range of the scan.
■Setting Scan Limits
You can store up to 10 scan ranges in memory channels L0/U0 to L9/U9.
1 Select the desired band.
2 Press [VFO].
3 Select the desired frequency as the lower limit.
4 Press [F], [MR].5 Press [UP]/ [DWN] to select a channel in the range L0 to L9.
6Press [OK].
•The lower limit is stored in the channel.
7Select the desired frequency as the upper limit.
8Press [F], [MR].
9Press [UP]/ [DWN] to select a matching channel in the range U0 to U9.
•If you have selected for example L3 in step 5, select U3.
10Press [OK].
• The upper limit is stored in the channel.
To confirm the stored scan limits, press [MR], then select the L and U channels.
Note:
◆The lower limit must be lower in frequency than the upper limit.
◆The lower and upper frequency step sizes must be equal.
◆The lower and upper limits must be selected on the same band.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
37