11 Press [A/B] to select band A or B.
2• If necessary, press [F], [A/B] to recall the
32 Press [F], [3] to switch the CTCSS function ON (or
OFF). |
|
|
|
|
|
|
| ||
4 |
|
|
|
|
|
|
|
|
|
• “CT” appears when CTCSS is ON. | |||||||||
5 |
|
|
|
|
|
|
|
|
|
6 |
|
| STA CON PACKET96 BCONDUP | ||||||
5 | 7 | 9 |
|
|
|
| |||
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
9 |
|
|
|
|
|
|
|
|
|
10You will hear calls only when the selected tone is
11received. To answer the call, press and hold the PTT
12switch, then speak into the microphone.
13Note:
◆You cannot use the CTCSS and Tone functions simultaneously.
14Switching the CTCSS function ON after activating the Tone function
15 |
| deactivates the Tone function. |
◆ | If you select a high CTCSS frequency, receiving audio or noise that | |
16 |
| contains the same frequency portions may cause CTCSS to function |
17 |
| incorrectly. To prevent noise from causing this problem, select an |
| appropriate squelch level {page 8}. |
18
19
20
21
22
23
This function scans through all CTCSS frequencies to identify the incoming CTCSS frequency on a received signal. You may find it useful when you cannot recall the CTCSS frequency that the other persons in your group are using.
1Press [F], [4] (1 s) to activate the function.
• The CTCSS function is switched ON.
STA CON PACKET96 BCONDUP
5 7 9
•If you access
•To reverse scan direction, press [UP] (upward scan) or [DWN] (downward scan).
•To quit the function, press [ESC].
•When the CTCSS frequency is identified, the identified frequency appears and blinks.
2Press [OK] to program the identified frequency in place of the currently set CTCSS frequency.
•The previous frequency display is restored with the CTCSS function remained ON.
•Press [ESC] if you do not want to program the identified frequency.
•Press [UP]/ [DWN] while the identified frequency is blinking, to resume scanning.
Note: Received signals are audible while scanning is in progress.
40