MICROPHONE CONTROL
1The optional
2has 3 Programmable Function (PF) keys on its top. You
3can assign these keys the transceiver key functions that you frequently use. First connect the optional speaker
4microphone to this transceiver.
The key functions you can assign are shown below:
5
6
The defaults on the PF keys are as follows:
Mic [1]: [A/B]LANP |
|
MONI |
|
Press [F] first. | Press [ENT] first. |
7Mic [2]: VFO/ Memory Recall mode switch
8Mic [3]: [CALL]91 Press Mic [1], [2], or [3]+ POWER ON depending on
LANP |
10
11
12
13
14
which key you want to reprogram.
• “PF 1”, “PF 2”, or “PF 3” appears.
SQL |
| |||
|
| |||
Press [F] first. |
|
| ||
[0] | Memory Channel | [5] | Offset freq. select | |
Lockout ON/ OFF | ||||
|
|
| ||
[1] | Tone ON/ OFF | [6] | AM/ FM switch 1 |
152 Press a key on the transceiver depending on the
16function you want to assign.
17• Pressing a single key on the keypad assigns only the
18function printed on the top of the key.
19• To assign the second function (printed in purple), press
[F]first (ex. [F], [VFO]).
20• Pressing the PTT switch assigns the function that
21switches between VFO and Memory Recall mode.
22• Press [F], [0] to [9] to assign the functions that are
[2] | Tone freq. select | [7] | Programmable VFO | |
range select | ||||
|
|
| ||
|
|
|
| |
[3] | CTCSS ON/ OFF | [8] | Freq. step size | |
select | ||||
|
|
| ||
|
|
|
| |
[4] | CTCSS freq. select | [9] | Memory name store |
1
Note:
◆ Turn OFF the transceiver power before connecting the optional |
23
selectable in Function Select mode.
speaker microphone. |
•Pressing [ENT], [0] to [9] allows you to recall memory channel 0 to 9.
◆ If the LOCK on the speaker microphone is ON, you cannot |
reprogram the Programmable Function keys.
44