1Each time you switch the transceiver ON, “HELLO !!” appears and stays for approximately 1 second. You can
2program your favorite message in place of the factory
3default.
41 Press [MENU] to enter Menu mode.
52 Press [1], [1], [1] to select
6• The display for entering a message appears; the first
7digit blinks.
8
9
10
11
12
133 Press [UP]/ [DWN] to select a character.
•You can enter alphanumeric characters plus special
14ASCII characters.
154 Press [OK].
16• The cursor moves to the next digit.
175 Repeat steps 3 and 4 to enter up to 8 digits.
18 | • | Pressing [OK] after selecting the 8th digit completes the | |
19 | |||
| programming. | ||
20 | • | To complete programming the message after entering |
6Press [MENU] to exit Menu mode.
You can also use the keypad to enter alphanumeric characters in step 3. For example, each press of [TNC] switches entry as A, B, C, a, b, c, then 2. Press [DUAL] to switch 0 and space. Press [ENT] to switch among the special ASCII characters.
TRANSCEIVER LOCKThis function prevents accidental changes, or unauthorized individuals from changing the transceiver settings.
Press [F] (1 s) to switch the function ON (or OFF).
• A key icon appears when the function is ON.
STA CON PACKET96 BCONDUP
5 7 9
You may want to use the Tuning control or [UP]/ [DWN] in Transceiver Lock mode. Access Menu
21
less than 8 digits, press [OK] twice.
• Each press of [ESC] causes the cursor to move
22backward.
23• Pressing [A/B] deletes the digit at which the cursor is blinking.
50