1The
2command from the Commander. So you must program
3different call signs (9 digits max.) on these transceivers
4as the IDs of the TNCs.
5Use the following Menu Nos. to program call signs:
6 |
| On Commander | ||
7 |
|
|
|
|
CMD CALL |
| Call sign for Commander | ||
8 |
| |||
|
|
|
| |
TRP CALL |
| Call sign for Transporter | ||
9 |
| |||
|
|
|
| |
10 |
|
| On Transporter | |
11 | CMD CALL |
| Call sign for Commander | |
12 |
|
|
|
|
TRP CALL |
| Call sign for Transporter | ||
13 |
|
|
|
|
|
|
|
|
141 Press [MENU] to enter Menu mode.
152 Press [4], [1] to select
16to select
17• The display for entering characters appears; the first
digit blinks. The default is “NOCALL”.
18
19
5 | 7 | 9 | 5 | 7 | 9 |
20
21
22
233 Press [UP]/ [DWN] to select a character.
•You can enter 0 to 9, A to Z, and
4Press [OK].
•The cursor moves to the next digit.
5Repeat steps 3 and 4 to enter up to 9 digits.
•Pressing [OK] after selecting the 9th digit completes the programming.
•To complete programming after entering less than 9 digits, press [OK] twice.
•Each press of [ESC] causes the cursor to move backward.
•Pressing [A/B] deletes the digit at which the cursor is blinking.
6Press [MENU] to exit Menu mode.
You can also use the keypad to enter alphanumeric characters in step 3. For example, each press of [TNC] switches entry as A, B, C, then 2. Press [ENT] to enter
On receiving a tone from the Commander, the Transporter causes the HF transceiver to enter Transmit mode. On both the Commander and Transporter, access Menu
STA CON | 96 BCONDUP |
5 7 9
86