CONTROL OPERATION
When in the Sky Command mode, the keys of the Commander will function as below. Only the functions of [LAMP], [MONI], and the VOL control will not change. First switch ON the HF transceiver and press [SYNC] on the Commander.
Tuning
control
Each time you press the desired key, the Commander will automatically enter transmit mode and send the corresponding control command to the Transporter.
To switch ON/ OFF the HF Press [POWER]. transceiver
Key | Function | |
|
| |
Tuning | Frequency or memory channel number | |
control | change | |
|
| |
UP/ DWN | RIT offset or XIT offset change | |
|
| |
A/B | In VFO mode: VFO A/ VFO B switch | |
In Memory Recall mode: no change | ||
| ||
|
| |
POWER 1 | Power ON/ OFF | |
RX 1 | HF frequency receive ON/ OFF | |
|
| |
MODE 1 | Modulation mode switch | |
|
| |
RIT 1 | RIT ON/ OFF | |
XIT 1 | XIT ON/ OFF | |
|
| |
CLR 1 | RIT offset or XIT offset clear | |
|
| |
SPLIT 1 | ||
M ➧ V 1 | Transfer from Memory to VFO | |
|
| |
FAST | In LSB, USB, or CW mode: 10 Hz/ 1 kHz | |
switch | ||
| In FM or AM mode: 1 kHz/ 10 kHz switch | |
|
| |
SYNC 1 | Current settings retrieve (from HF |
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
To transmit audio on a HF
Press and hold the PTT
transceiver) |
18
frequency
switch, then speak into the microphone.
ENT | In VFO mode: frequency entry ON |
In Memory Recall mode: channel number |
19
20
To receive audio on a HF
entry ON |
frequency
Press [RX].
M/V | VFO/ Memory Recall mode switch |
To monitor the UHF band
1 |
on the Commander
Press and hold [MONI].
After pressing [ENT], you can use these keys as numeric |
keys to enter a frequency or memory channel number. |
21
22
23
87