13
DIALLING STORED DTMF NUMBERS
1Press the microphone key.
•“” appears on the display.
2Enter the desired memory location number (1 ~ 9).
•The digits stored in the selected location number appear on the display.
•To cancel, press any key other than the PTT switch.
3Press the PTT switch.
•If programmed by your dealer, no DTMF tone will sound when “D” is transmitted.
“D” is used for a pause time. The pause duration is programmed by your dealer.
CLEARING STORED DTMF NUMBERS
1Press the microphone # key.
•“” appears on the display.
2Press the microphone # key again.
•“ ” appears on the display.
•To cancel, press any key other than 1 ~ 9.
3Enter the memory location number (1 ~ 9) you want to clear.
•The memory location number is cleared and the display returns to normal.
REDIALLING
1Press the microphone key.
•“” appears on the display.
2Press the microphone 0 key.
•The digits last dialled appear on the display.
•If there is no data in the redial memory, an error tone will sound.
•To cancel, press any key other than the PTT switch.
3Press the PTT switch.
Note: Switching the transceiver power OFF clears the redial memory.